Well Drilling Solids Control Mud Cleaner Supplier
|FOB Price:||US $11,000-23,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $11,000-23,000/ Piece|
|Production Capacity:||100 Set/ Year|
|Transport Package:||Sea Worthy|
|Payment Terms:||L/C, T/T, Western Union|
- Model NO.: Hunter
- Usage: Well Drilling Machinery, Solids Control Equipment
- Power Type: Electric
- Color: Green, White, Red, Black, Blue, Yellow, etc.
- Electrical System: 220~460V, 50/60Hz, 3pH
- 3rd Part Inspection: Available Upon Request
- Document: User Manual, All Related Files
- Customization: Available
- Trademark: Aipu Solids control
- Origin: China
- Type: Petroleum Drilling Tool & Accessory
- Certification: ISO, API
- Transmission System: Mechanical/Hydraulic
- Name Plate: Customizable
- Explosion: Explosion Proof Exd Bt II
- Commissioning: Free or Depend on Actual Project
- Painting: Epoxy Zin Rich, Anti Corrosive Polyurethane
- Shipment: Effected by Us or Buyer
- Specification: API, ISO
- HS Code: 84748090
Combine the shale shaker, desander, desilter to be one equipment-mud claner. Drilling fluid processed by shale shaker the solid will be smaller and less. But we need to do further purification. Drilling mud will be transfered to desander cone the particles larger than 47 microns will be separated out. While the drilling fluid flow back to mud tank will be pumped to desilter cones again for desilting process. Almost particles larger than 15 microns will be get rid of. Then the fluid flowing back to mud tank will be processed by decanter centrifuge. All process before centrifuge made sufficient preparation
Mud cleaner Application
Onshore and offshore oil&gas drilling/CBM/HDD/Pilling project/waste sewage processing. All these project will request such separation/purification. In short, mud cleaner is suitable for various of drilling mud or liquid&solid mixture management.
Issues affecting cleaner performance
Drilling depth, drilling fluid property, general drilling condition, shaker screen selection, configured equipment/pump, etc.
Including the support base, support frame, bottom shaker, shaker beam, vibration motor, screw jack, screen, desander cone, desilter cone, pressure gauge, necessary pipes, etc.
Mud cleaner will be fixed behind shale shaker.Since desander and desilter are the second and third phase solids control equipment.On the tank top we'll find position block for mud cleaner help user confirm the correct position and distance. The concerned compartment will be opening on tank top.Moreover, mud tank should be put on plain and clean ground to decrease effect from ambient condition. During handling and shipment please don't install the screen on it to avoid any broken. The shipping bracket should be always locked
Leave the shipping bracket before operation. Don't repair, move, even uninstall motor, etc. during its running. Ensure desander and desilter pipelines are connected steadily no any leakage. Check pressure gauge make sure the level is in the valid range
Pay attention on maintaining cones and clean the drop in apex for better performance and longer service life.
Do the maintenance on motors according to the warnings on motor, such as lubrication.
During operation do inspection, observation on shaker screen. Replace or repair shaker screen in time Every shut off do the complete cleaning on bottom shaker and the shaker screen Inspect shaker condition completely regularly according to plan for best performance.
If there is block on cones drop in Apex or no discharge please screw out the cap and clean the drop in apex Correct jet from the cones should be umbrella, if not please screw the drop in apex. properly according to user manual When the drilling mud out of cones with little pressure please adjust feeding pump to get sufficient pressure and flow rate Bottom shaker may be blocked please adjust the deck angle not too high or too low. Too low will lead the mud lost. Furthermore, check the shaker screen are suitable for certain process drilling mud When bottom shaker motion is not rated track please check vibration motor maybe there is only one motor running or the rotation direction is incorrect. If so please cut down the power and correct the issues
Solids control Mud cleaner specification
|Model||Hunter 50||Hunter 90||Hunter 120||Hunter 200||Hunter 240||Hunter 320|
|Vibration||Linear or BEM|
|Desilter||4" x 4||4" x 6||4" x 8||4" x 10||4" x 12||4" x 16|
|Desander||8" x 2||10" x 1||10" x 1||10" x 2||10" x 2||10" x 3|
|Shaker||All Hunter series|
|Motor||1500 or 1800rpm|
|Remark||4"cone=12~15m³/h, 8"cone=30~35m³/h, 10"cone=90~120m³/h. Capacity is customer configured|